2.0L TSI EA888 Gen.3 MQB Low pressure final stage fuel pump control unit
Control unit for the fuel pump in the 2.0L TSI engines of the third generation. If you have installed a new fuel pump, it can often happen that it does not always work correctly. Mostly it is concluded that the pump is defective. Our experience has shown that this is not the case, but that the control unit is defective or loses power. The control unit wears out like many other components. The control unit should always be replaced together with the pump, to be really sure that enough power is available. The control unit is simply replaced plug & play No further changes for example to the engine software necessary with series software! After installation, check the fuel gauge and adjust with VCDS if necessary. If your pump does not work correctly, please let the software tuner program the control of the pump (PWM signal) to series!