RVS additive motor protection G4

RVS is known from Top Fuel Drag Race and not only reduces fuel consumption by 5 to 10%, but also the service life and performance of your engine. One application is sufficient for engines with less than 40tKm mileage. Features: Cannot be overdosed. Ceramic microelements adhere to all friction surfaces (bearings, bore, piston, camshafts etc..). Reduces fuel consumption. Significantly increases the service life of the engine and turbo. Reduces internal vibrations. Idle running is positively influenced. Improved cold starting characteristics. Less friction, thus better engine start and easier revving. Reduction in exhaust emissions (AU test is better). High-boost proofed (drag race). Tüv-Süd approved! Engine runs cooler. Reduced friction in the turbocharger, better spool-up. RSV engine protection creates a ceramic surface on the rubbing surfaces of an engine. The thickness of the new surface depends on the wear - tolerances are restored to their original state. It also means that engine characteristics such as oil pressure and compression can be achieved as with a new vehicle. The ceramic surface has extremely good properties - friction and abrasion are dramatically reduced and engine life is multiplied! When friction is reduced, the amount of energy lost is reduced. This leads to lower emissions and more efficient engine operation. The engine becomes more durable and economical. Instructions: Mix the contents of the pack together. Pour half of the mixture into a warm engine, let the engine idle for 15 minutes and pour the rest of the mixture into the engine. Start the engine and drive or let it idle for at least 30 to 40 minutes. It's that simple! Detailed instructions are included in the pack. RVS has unique properties; it protects and prevents wear of surfaces and mechanisms. RVS is the only technology capable of restoring sliding surfaces to their original shape and tolerances in good cases. The new surface structure is autoreactive, without dismantling the system to be restored. In practice, this means that there is no downtime or loss of production. We recommend carrying out the process twice in order to achieve optimum protective coating formation for 100,000 kilometres and more. The product cannot be overdosed. Sold in size G4, for an oil capacity of 2 to 4 litres.